Your business,
our energy.
eni oil products

Product characteristics

Eni Rotra ATF II D is a special lubricant used primarily in automatic gearboxes and in many other applications where oils suitable for low temperature conditions, with high viscosity index and high stability at mechanical stresses are required. It is suitable for first filling and for topping up in automatic and hydraulic transmissions of those manufacturers that prescribe fluids that comply with the GM DEXRON IID specification.
Product code 001297
Name Eni Rotra ATF II D
Specifications and Approvals MAN 339 V-1 level| MAN 339 Z-1 level| Ford MERCON Level| GM DEXRON IID level| Allison C-4| Caterpillar TO-2| MB 236.6| Voith H55.6335.xx| ZF TE-ML 04D, 05L, 09, 11A, 14A, 17C
  Product profile
pdf
Eni Rotra MP 80W-90 is an E.P. (Extreme Pressure) gear oil recommended for hypoid gears operating under severe conditions, and for very highly loaded gears in general, especially those subjected to dynamic loads. It is especially suited for axle drives with hypoid gears, which show very high loads, sliding contact and high temperatures. It can also be used in the gearboxes on cars and trucks, and in gearboxes, axles, final drives and power take-offs on farm and earth-moving machinery, and in general for all gears trains for which the manufacturer recommends an API GL-5 performance. It is also suitable for the lubrication of gearboxes in outboard engines and sterndrive systems.
Product code 001275
Name Eni Rotra MP 80W-90
Specifications and Approvals API GL-5| MIL L 2105 D| MAN 342 type M1| MAN 342 type M2| ZF TE-ML 05A, 07A, 08, 12E| ZF TE-ML 16B, 17B, 19B, 21A
  Product profile
pdf
Eni Rotra ATF Multi is a premium synthetic technology lubricant that is suitable for a variety of different automatic transmissions, fitted on modern passenger cars and commercial vehicles, designed by the leading international manufacturers. The product has been specifically formulated to comply with the requirements of modern Asian step-type automatic transmissions, but it also suits the demands of other important European and North American transmissions producers. Eni Rotra ATF Multi is suitable for use in automatic transmissions that are equipped with or without a slip lockup clutch. Thanks to its versatility of use and backward compatibility to older models, this product can be profitably used for multi-fleet owners in order to minimize product storage.
Product code 001310
Name Eni Rotra ATF Multi
Specifications and Approvals NISSAN MATIC D, J, K| MB-Approval 236.9| JASO 1-A| BMW LT 71141| AISIN JWS 3309| CHRYSLER ATF+3/+4| Toyota T-IV| GM DEXRON IIIH| Ford MERCON/MERCON V| MAN 339 type V - 1| MAN 339 type V2| ZF TE-ML 04D, 14B, 16L, 16R, 20B, 25B
  Product profile
pdf
For product Safety Data Sheets, please go to the Eni Safety Data Sheets site.