Spring is approaching with big steps and the bikers can hardly wait to do the first laps with their motorbike after the long winter break. In order to get through the motorcycle season with a lot of joy, lubricants of the best quality are necessary. Here Eni offers a range of products to provide the right lubricant for all operating conditions.
The Eni i-Ride Racing products are designed for riders of high performance motorcycles who move them sporty, or participate in race trainings and racing events. The high-quality synthetic components of these oils ensure adequate lubrication even under extreme operating conditions. The product selection ranges from three 4-stroke engine oils, in viscosity SAE 5W-40, SAE 10W-60 or SAE 10W-50 especially for off-road use, to the 2-stroke engine oil Eni i-Ride Racing 2T.
For all bikers who use their two-wheelers daily - whether on long tours or in stop-and-go traffic on the way to work - and do not want to do without high-quality motor oils, products from the Eni i-Ride moto- and Eni i-Ride scooter - line are exactly the right thing. Depending on vehicle requirements, customers can choose between the viscosities SAE 10W-40, SAE 15W-50 and SAE 20W-50. Eni also offers a 2-stroke engine oil, the Eni i-Ride scooter 2T.
To round off the product portfolio, there are further lubricants and specialities for this segment to choose from. With the mineral Eni Rotra Bike 80W-90 and the synthetic Eni Rotra Bike Synth 75W-90, there is something suitable for every motorcycle or scooter transmission. With the Eni Fork-Oil line in the viscosities 5W, 7.5W, 10W and 15W, we also offer a suitable lubricant for all shock absorbers and fork designs in the chassis area. Due to the four different viscosities the annoying mixing of the suitable viscosity is not necessary in most cases.
In order to complete its range of products for two-wheelers, Eni offers a number of specialities in the field of maintenance and care. These include, for example, the brake fluid Eni Brake Fluid DOT 4 or the ready-mixed radiator protection agent Eni Antifreeze Bike S. The maintenance spray AUTOL Multispray M2000 with MoS2 can be used to lubricate moving parts or to loosen stuck bolts. For the lubrication of moving parts the highly water resistant grease spray AUTOL TOP 2000 grease spray is excellently suited. Last but not least, the use of the fuel additive AUTOL Desolite B can prevent the occurrence of malfunctions such as unwillingness to start or poor throttle response after wintering due to sticky ethanol residues in the carburettor or injection system.
The Eni i-Ride Racing products are designed for riders of high performance motorcycles who move them sporty, or participate in race trainings and racing events. The high-quality synthetic components of these oils ensure adequate lubrication even under extreme operating conditions. The product selection ranges from three 4-stroke engine oils, in viscosity SAE 5W-40, SAE 10W-60 or SAE 10W-50 especially for off-road use, to the 2-stroke engine oil Eni i-Ride Racing 2T.
For all bikers who use their two-wheelers daily - whether on long tours or in stop-and-go traffic on the way to work - and do not want to do without high-quality motor oils, products from the Eni i-Ride moto- and Eni i-Ride scooter - line are exactly the right thing. Depending on vehicle requirements, customers can choose between the viscosities SAE 10W-40, SAE 15W-50 and SAE 20W-50. Eni also offers a 2-stroke engine oil, the Eni i-Ride scooter 2T.
To round off the product portfolio, there are further lubricants and specialities for this segment to choose from. With the mineral Eni Rotra Bike 80W-90 and the synthetic Eni Rotra Bike Synth 75W-90, there is something suitable for every motorcycle or scooter transmission. With the Eni Fork-Oil line in the viscosities 5W, 7.5W, 10W and 15W, we also offer a suitable lubricant for all shock absorbers and fork designs in the chassis area. Due to the four different viscosities the annoying mixing of the suitable viscosity is not necessary in most cases.
In order to complete its range of products for two-wheelers, Eni offers a number of specialities in the field of maintenance and care. These include, for example, the brake fluid Eni Brake Fluid DOT 4 or the ready-mixed radiator protection agent Eni Antifreeze Bike S. The maintenance spray AUTOL Multispray M2000 with MoS2 can be used to lubricate moving parts or to loosen stuck bolts. For the lubrication of moving parts the highly water resistant grease spray AUTOL TOP 2000 grease spray is excellently suited. Last but not least, the use of the fuel additive AUTOL Desolite B can prevent the occurrence of malfunctions such as unwillingness to start or poor throttle response after wintering due to sticky ethanol residues in the carburettor or injection system.
Back to top
