Product characteristics
Eni Lamium 11 C is an odorless, colourless, dearomatized and desulphurized petroleum distillate, suitable for cold aluminum rolling. The product assure good result of the laminate product and guarantees the complete absence of stainings both during rolling and after the annealing phase. It is particularly suitable for cold rolling thin sheets and strips of thin aluminum (7-15 μm) intended for the food, pharmaceutical and cosmetic industries thanks to FDA 21 CFR 178.3910. Can be used for cold aluminum rolling of larger thicknesses. The wide temperature range between the final boiling point and the annealing temperature, permits to extend the use of the product and its complete evaporation during the annealing phase, requirement necessary for compliance with FDA 21 CFR 178.3910. | |
Product code | 007069 |
---|---|
Name | Eni Lamium 11 C |
Specifications and Approvals | US FDA 21 CFR 178.3910 |
Eni Rolling AST 2 is a special oil suitable for stainless steel cold rolling on Sendzimir mills. Particularly recommended to optimally meet the BA (Bright Annealed) finishing requirements for rolled sheets where highly reflective surfaces and no spotting is requested. The viscosity has been accurately defined in order to limit losses due to volatility as well as ensuring a good coolant effect, also supported by a good wetness due to the presence of polar constituents. The balanced adhesiveness allows the formation of a continuous and persistent lubrication film that ensures an adequate reduction of the friction coefficient without causing slipping between the work cylinders and the sheet. Eni Rolling AST 2 has been specifically formulated with a base oil and additives that do not give stains or spots on any type of rolled sheet. Excellent oxidation resistance and anti-corrosive properties, highlighted by overcoming rust protection even in the presence of salt water. Eni Rolling AST 2 is compatible with the filtering materials used for the filtration. | |
Product code | 005241 |
---|---|
Name | Eni Rolling AST 2 |
Product profile
|
Eni Rolling TNX is a special oil suitable for stainless steel cold rolling on Sendzimir mills. The viscosity has been accurately defined in order to limit losses due to volatility as well as ensuring a good coolant effect, also supported by a good wetness due to the presence of polar constituents. The balanced adhesiveness allows the formation of a continuous and persistent lubrication film that ensures an adequate reduction of the friction coefficient without causing slipping between the work cylinders and the sheet. Eni Rolling TNX has been specifically formulated with a base oil and additives that do not give stains or spots on any type of rolled sheet. Excellent oxidation resistance and anti-corrosive properties, highlighted by overcoming rust protection even in the presence of salt water. Eni Rolling TNX is compatible with the filtering materials used for the filtration. | |
Product code | 005271 |
---|---|
Name | Eni Rolling TNX |
Product profile
|
For Material Safety Data Sheets (MSDS), please go to the Eni Safety Data Sheets site.