Product characteristics
| Eni Aquamet 700 MB is a semi-synthetic cutting fluid with excellent technological characteristics free from chlorine, boron, secondary amines and bactericide. Formulated with detergent and anticorrosive additives. Eni Aquamet 700 MB is recommended in grinding and in medium severe cutting operations on ferrous materials in single and/or centralized plants. The product can be extended to machining aluminum and its alloys after assessment of the staining test. It guarantees low foam formation in a wide range of water hardness. | |
| Product code | 007544 |
|---|---|
| Name | Eni Aquamet 700 MB |
| Specifications and Approvals | ISO 6743/7 MAE |
|
Product profile
|
|
| Eni Aquamet 500 FG ECO is a semisynthetic cutting fluid with excellent technological features, free of chlorine, boron, secondary amines and bactericides. Formulated with special additives, detergent and anticorrosive agents. Eni Aquamet 500 FG ECO has excellent performance in grinding and in medium severe cutting operations on medium-alloyed steels and cast iron, its applications can be extended to aluminum and its alloys after the staining tests. Very low tendency to foam in a wide range of water hardness and with high pressure delivery. Suitable for single and centralized plants. | |
| Product code | 007086 |
|---|---|
| Name | Eni Aquamet 500 FG ECO |
| Specifications and Approvals | ISO 6743/7 MAE |
|
Product profile
|
|
| Eni Aquamet 85 Plus is a new technology cutting fluid, free of formaldehyde donor bactericide, chlorine and secondary amines; formulated with detergents, anticorrosive and antirust agents. It is suitable for grinding and for cutting operations of medium severity such as: turning, milling, drilling, on steel and cast iron in single and centralized plants. Eni Aquamet 85 Plus can be used for tube forming at 6-8%. | |
| Product code | 007520 |
|---|---|
| Name | Eni Aquamet 85 Plus |
| Specifications and Approvals | ISO 6743/7 MAE |
|
Product profile
|
|
| Eni Aquamet 86 is a water miscible cutting oil free of chlorine and secondary amines. Specific for grinding, turning and milling operations on medium alloyed steel and cast iron, for single and centralized plants. Eni Aquamet 86 can be used for forming and profiling of steel and stainless steel tubes at 6-8%. | |
| Product code | 007521 |
|---|---|
| Name | Eni Aquamet 86 |
| Specifications and Approvals | ISO 6743/7 MAE |
|
Product profile
|
|
| Eni Aquamet 500 FG Plus is a new technology cutting fluid, free of formaldehyde donor bactericide, chlorine and secondary amines, formulated with special additives, detergent and anticorrosive agents. Specific for grinding and for medium severe cutting operations on medium alloyed steels and cast iron, it can be extended to machining on aluminum and its alloys after the staining test. Very low tendency to foam in a wide range of water hardness and with high pressure delivery. Eni Aquamet 500 FG Plus is suitable for single and centralized plants. | |
| Product code | 007524 |
|---|---|
| Name | Eni Aquamet 500 FG Plus |
| Specifications and Approvals | ISO 6743/7 MAE |
|
Product profile
|
|
| Eni Aquamet 260 EP is a semisynthetic EP cutting fluid free of formaldehyde donor bactericide. Suitable for severe cutting operations such as: tapping, boring, deep drilling and rough grinding operations on all ferrous materials. Eni Aquamet 260 EP can be used for stamping, deep drawing and blanking machinings of medium severity at a percentage between 10 and 20%. The product guarantees excellent performance in single and centralized plants. | |
| Product code | 007648 |
|---|---|
| Name | Eni Aquamet 260 EP |
| Specifications and Approvals | ISO 6743/7 MAF |
|
Product profile
|
|
For product Safety Data Sheets, please go to the Eni Safety Data Sheets site.
